Cleaning agitator replacing agitator – Panasonic MC-GG523 User Manual
Page 44
Advertising

- 44 -
Cleaning Agitator
Replacing Agitator
➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint
entangled around agitator with a
pair of scissors.
➢ Remove agitator.
➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ Reinstall agitator and lower plate.
+
➢ When the bristles on the agitator are
worn so that they do not touch a
card held across the lower plate, the
agitator should be replaced.
➢ Remove lower plate and agitator.
➢ Clean debris from end caps.
➢ Position belt over belt pulley on the
new agitator.
➢ Reinstall agitator and lower plate.
Card
Carte
Tarjeta
Advertising