Panasonic NE-17521 - Manual (Page 11)

- 11 -
How to Operate
A. MANUAL HEATING — 2 to 5 stage heating —
Example: To cook food at HIGH power for 2 minutes and at DEFROST power for 1 minute
PAD INSTRUCTION DIGITAL DISPLAY WINDOW
Follow steps 1 to 3 on page 10.
4 Press Power Level Selector pad.
Each time the pad is pressed, the Power Level switches as the Power 
Level Selector pad illustration on page 10.
The selected power level will be indicated and 2nd Stage Heating
Indicator “2” will start to blink.
5 Press Number/Memory pads “1”, “0” and “0”.
The set heating time will appear.

Note: The maximum set time for “DEFROST” and “P0” is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes for
continuous heating (2 to 5 stage heating) that excludes
“DEFROST” and “P0”.
6 Press Start pad.
The oven lamp will turn on. 
The total time is displayed. During operation, the indicator appears in
order from the left and heating time for the first stage will count down.
s
displayed and heating time will count down.
s
off. “0000” will blink until the door is opened. 1 minute later, cooling fan will stop.
s
will show the originally set time and Heating Stage Number.
s
blank.
Note: Repeat the above procedure to set Heating for the third stage and later stages.
SPECIAL NOTE: For both single and 4 stage heating
While heating, one press on Stop/Reset pad stops the operation. You can restart it by pressing Start pad or a 1.
second press on Stop/Reset pad will cancel the selected program.
While not heating, one press on Stop/Reset pad cancels the selected program.
2.
When heating is complete, you can repeat exactly the same manually selected heating time by pressing only 3.
Start pad you use the oven again within 1 minute.
1 minute later of non-use with door closed, the repeat feature will be cancelled.
4.
0'#2RFH