Panasonic NE-17521 - Manual (Page 19)

- 19 -
Example: To display the filter cleaning alarm counter
PAD INSTRUCTION DIGITAL DISPLAY WINDOW
1 Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.

2 While pressing Start pad, press Number/Memory pad “5”.
The cumulative total cooking time elapsed since the last time it was

cleared is displayed.
e.g.
s
J. OVEN LAMP
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 14-15)
/VEN

Example: To turn Oven Lamp settings OFF
PAD INSTRUCTION DIGITAL DISPLAY WINDOW
1 Open the door and leave it open.
The oven lamp will turn on, and “0” will appear.

2 While pressing Start pad, press Number/Memory pad “9”.
“PROG” will start to blink.

The previously set Oven Lamp settings are displayed.
3 Press Start pad.
“on”

“oFF” “on” is repeated each time the pad is pressed.
4 Press Prog pad.
“PROG” will stop blinking, and the Oven Lamp settings will appear for

3 seconds.
Then “0” will appear.
To proceed to Step 5, press Start pad before “0” is displayed
after Step 4.
How to Operate
Continue
0'#2RFH