Panasonic FV-08VSL1 - Manual (Page 4)

SPECIFICATIONS
UNPACKING
Specifications are based on HVI standard.
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
GENE AL SAFETY INFO MATION
R R
GENE AL SAFETY INFO MATION
R R
1. Do not install this ventilating fan where air temperature may exceed 40 C (104 F). o o
2. Make sure that the electric service supply voltage is 120 V, 60 Hz.
3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the
Occupation Safety and Health Act (OSHA).
4. Always disconnect the power source before working on or near the fan, motor, light fixture or junction box.
5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects.
6. Do not kink the power cord.
7. Do not install the unit where ducts are configured as shown in Fig. A.
8. Provide suction parts with proper ventilation.
9. This unit is UL listed for use over a bathtub or shower when installed in a GFCI protected branch circuit.
Noise
(sones)
Duct
diameter
(inches)
26 4
(cfm)
944 80 3 1.3 18 X 2 FV-08VSL1
(rpm)
12.8 (5 ) .8
Fig. A
Prohibition
Adaptor
Prohibition Prohibition Prohibition
Lighting unit
Fan body
10. This product has a fluorescent lamp that contains mercury. Disposal may be regulated in your community
due to environmental considerations. For disposal or recycling information, please contact your local
authorities or the Electronics Industries Alliance:http://www.eiae.org