Panasonic FV-08VSL1 - Manual (Page 9)

Make sure that adaptor claws are properly inserted
into body slots.
IMPORTANT:
5. Insert the fan body into joists. (Fig.9)
6. Secure the fan body to adaptor by using thumb
screw and plug connector to receptacle. (Fig.10)
INSTALLATION JOIST MOUNTING- CONTINUED II II
( )
INSTALLATION JOIST MOUNTING- CONTINUED II II
( )
When mounting
body and blower
separately
1. Loosen 4 screws (but
do not remove them
from blower). (Fig.12-1)
2. Remove blower section.
(Fig.12-2)
4. Insert fan body (without
blower section) into joists.
(Fig.9)
5. Secure the adaptor to
fan body by using thumb
screw. (Fig.10)
7. Insert the blower into the
fan body. (Fig.12-3)
8. Secure the blower.
(Fig.12-4) and plug
connector to receptacle.
(Fig.10)
3. Remove adaptor from
fan body and secure it
to joists as in Fig.8 of
page 8.
9
7. Secure to joists by using
long screws (ST4.2X20) and secure it to fan body
by using screw
(ST4.2X12) in vertical direction.
(Fig.11)
the suspension bracket
II
8. Follow step 8 to 11 of installation (page 8) to
complete the installation work.
I
Fig. 9
4. Insert to fan body (refering
to step 2 of installation , page 6).
the suspension bracket in
I
Fig. 11
2 Long screws
(ST4.2X20)
Screw (ST4.2X12) II
6. Secure the fan body
to joists by using long
screw (ST4.2X20).
(Fig.11)
Conduit
Junction box cover
Circular duct
Joist
Fan body
Adaptor
claws
Fig.12-1
Adaptor
4 Screws
Fig.12-4
4 Screws
Screw driver
Fig.12-3
Fan body
Fig.12-2
Fan body
Blower
Fig. 10 Thumb
screw
Plug connector I Receptacle I
Ceiling
Joist