Panasonic BB-HCM381A - Manual (Page 120)

Operating Instructions
120
3.1.4 Updating the Camera Firmware
The Update Firmware page allows you to update the camera firmware. If the new
firmware is available, install it into the camera.
Note
• Do not turn off the power during firmware update.
• All buffered images on the internal memory will be deleted after the
firmware update. The buffered images on the SD memory card are not
deleted.
• The firmware version is displayed on the Top page and the Status page.
1. Download the new firmware on the Panasonic Network Camera support
website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it
on your PC.
2.
Click [Update Firmware] on the Maintenance page.
3.
Click [Update Firmware].
• The camera restarts.