Panasonic TC-60AS650U - Manual (Page 129)

- 129 -
3D settings
MENU Menu > Picture > 3D settings
Auto detect 3D
(
Auto 1/Auto 2/Off)
Auto 1:
Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2:
Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note:
● Choose 3D mode manually when auto detection is not available.
3D signal notification
(
On/Off)
On:
Displays a message according to the signal received by the Auto
detect 3D .
2D→3D depth
(
High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(On/Off)
Adjust the left eye versus right eye depth effect of the image. Set to
On to
adjust Effect ( -3 to +3).
●
Gray-out in 2D mode
Left/Right swap
(
Normal/Swapped)
Flips the phase of the image to give the correct perception of depth.
● Gray-out in 2D mode