Panasonic TC-60AS650U - Manual (Page 97)

- 97 -
Connecting note
■
When adding new equipment...
When adding new equipment, reconnecting equipment or changing the
setup after the connection, turn the equipment on and then switch the
TV on. Set the input mode to correct HDMI terminal, and make sure that
the image is displayed correctly.
VIERA Link “HDAVI Control”, is based on the control functions provided by
HDMI and industry standard known as HDMI CEC (Consumer Electronics
Control), with unique function that we have developed and added. As such,
its operation with other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed. Please refer to the individual manuals for other
manufacturers’ equipment supporting the VIERA Link function.
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-
compliant cables cannot be utilized.
● For more details on the external equipment’s connections, please refer to
the operating manual for the equipment.
HDMI connections to some Panasonic equipment allow you to interface
automatically.
● This function may not work normally depending on the equipment
condition.
● The equipment can be operated by other remote controls with this function
on, even if the TV is in Standby mode.
●
Image or sound may not be available for the first few seconds when
playback starts.
●
Image or sound may not be available for the first few seconds when input
mode is switched.
● Volume function will be displayed when adjusting the volume of the
equipment.
● If you connect equipment that has “HDAVI Control 2” or later function to
the TV with an HDMI cable, the sound from the DIGITAL AUDIO OUT
terminal can be output as multi-channel surround.
● “HDAVI Control 5” is the newest standard for the HDAVI Control
compatible equipment.
This standard is compatible with the conventional HDAVI equipment.