Registering a unit – Panasonic KX-TG242SK User Manual

Page 26

Advertising
background image

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:
– the unit receives a call from a phone number

stored in the call block list as unwanted (“Storing
unwanted callers
”, page 26).

– the unit receives a call without phone number

(“Blocking incoming calls without phone
number”
, page 26).

When a call is received, the unit rings for a short
time while the caller is being identified. If the
phone number matches an entry in the call block
list, the unit sends out a busy tone to the caller,
and then disconnects the call.

Important:
R When the unit receives a call from a number

that is stored in the call block list or a call
without a recognized phone number, the call is
logged in the caller list (page 29) with after
the call is disconnected.

Storing unwanted callers
You can store up to 30 phone numbers in the call
block list.

Important:
R We recommend storing 10 digits (including an

area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.

Handset

n

From the caller list:

1

MFN CID

2

MbN: Select the entry to be blocked.
R To edit the number, press MEDITN

repeatedly until the phone number is
shown in the 10-digit format.

3

MSAVEN

4

MbN: “Call block” a MSELECTN

5

MbN: “Yes” a MSELECTN

6

Edit the phone number if necessary (24
digits max.).

7

MSAVEN a MOFFN

n

By entering phone numbers:

1

MMENUN#217 a MADDN

2

Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.

3

MSAVEN a MOFFN

Blocking incoming calls without phone number
You can reject a call when no phone number is
provided, such as a call just showing “Out of
area”
.

Handset

1

MMENUN#240

2

MbN: Select the desired setting. a MSAVEN
a MOFFN

Viewing/editing/erasing call block numbers

Handset

1

MMENUN#217

2

MbN: Select the desired entry.
R To exit, press MOFFN.

3

To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN a
MOFFN

Note:
R When editing, press the desired dial key to add,

MCLEARN to erase.

R When viewing, “Block w/o num” is displayed

if the blocking incoming calls without phone
number feature is turned on. To turn the feature
off: MERASEN a MCN a MSAVEN a MOFFN

Registering a unit

Operating additional units

Additional handsets
Up to 6 handsets can be registered to the base
unit.

Important:
R See page 4 for information on the available

model.

26

For assistance, please visit http://www.panasonic.com/help

Programming

TG477x(en-en)_1130_ver021.pdf 26

2011/11/30 15:57:55

Advertising
This manual is related to the following products: