Panasonic DMC-GH4KBODY User Manual
Page 100
4.
Focus and Shutter (Drive Mode) Settings
100
When selecting [
]/[
]
When [
] is selected, you can change the vertical size
and position; when [
] is selected, you can change the
horizontal size and position.
When selecting [
]/[
]/[
]/[
]
Drag your finger over the parts you want to set as AF
areas.
•
If you touch one of the selected AF areas, the selection of
the area will be canceled.
Press 3/4/2/1 to select the AF area, and then press [MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed again.
•
If you press [DISP.], all the selections will be canceled.
6
Press [Fn2].
∫
Registering the set AF area to [
], [
] or [
]
1
On the screen in step
3
, press 3.
2
Press 3/4 to select a destination to which the setting will be registered, and
press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
Settings registered to
/
/
will be stored even after this unit is turned off.
•
Turning off this unit will return the setting adjusted with
/
/
back to the default setting.
•
If you press a cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the
AF area setting screen will be displayed.
Button operation
Touch
operation
Description of
operation
3/4/2/1
Touching
Moves the
position
/
/
Pinching in/out
Changes the size
(Up to 3 lines)
[DISP.]
[Reset]
Restores the
default setting
Touch operation
Button operation
FREE
ヤヒ
ヤビ
ヤピ
ヤヒ
ヤビ
ヤピ
ヤヒ
ヤビ
ヤピ
FREE