Taking pictures by using the flash, Changing flash mode – Panasonic DMC-GH4KBODY User Manual

Page 57

Advertising
background image

57

Recording

(ENG) VQT5H68

Taking pictures by using the flash

Taking a picture using the flash becomes possible by opening
the built-in flash.

A To open the flash

Turn the camera on, and press the flash open button.

B To close the flash

Push the top part of the built-in flash from directly above.

•

Forcibly closing the flash can damage the camera.

•

Make sure to close the built-in flash when it is not in use.

•

The flash setting is fixed to [Œ] while the flash is closed.

•

Be careful not to catch a finger when closing a flash bulb.

•

In the following cases, the flash is fixed to [Œ] (forced flash off).

–

When recording motion pictures

–

When [Electronic Shutter] is set to [ON]

–

When [HDR] is set to [ON]

–

When [Silent Mode] is set to [ON]

Set the built-in flash to match the recording.

1

Select the menu. (P28)

2

Press 3/4 to select the item and then press [MENU/SET].

Applicable modes:

Changing Flash Mode

Applicable modes:

>

[Rec]

> [Flash] > [Flash Mode]

‰

([Forced Flash On])
([Forced On/Red-Eye])

The flash is activated every time regardless of the recording

conditions.

•

Use this when your subject is back-lit or under

fluorescent light.

([Slow Sync.])
([Slow Sync./Red-Eye])

When taking pictures against a dark background landscape,

this feature will slow the shutter speed when the flash is

activated. Dark background landscape will appear brighter.

•

Use this when you take pictures of people in front of a

dark background.

•

Using a slower speed can cause motion blur. Using a

tripod can enhance your photos.

MENU

DMC-GH4_PPC-VQT5H68_eng.book 57 ページ 2014年3月12日 水曜日 午後10時35分

Advertising
This manual is related to the following products: