Panasonic DMC-GH4KBODY - Manual (Page 74)

74
Wi-Fi/NFC
VQT5H68 (ENG)
∫ About the Wi-Fi connection lamp
• The camera cannot be used to connect to a public wireless LAN connection.
• Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
• It is recommended to use a fully charged battery when sending images.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Do not remove the memory card or battery or move to an area without any reception
while sending images.
• The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
• If you use the HDMI output during recording with [Bit Mode] in [HDMI Rec Output] set to
[4:2:2 10bit], the Wi-Fi function will be disabled.
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone/tablet)
•
The information required for connecting the smartphone/tablet to
this unit (QR code, SSID and password) is displayed. (P76)
Pressing [Wi-Fi] before connecting to Wi-Fi
•
Following items can be selected.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[New Connection] —
[Select a destination from History]
Connects with the same settings as the previous ones.
Registering records as favorites
1 Select the item you want to register to favorites,
and then press 1.
2 Enter a registration name.
[Select a destination from Favorite] Connects with settings registered as favorites.
ヸㄊノョㄊ
ョㄏヒ
ヸㄊノョㄊ
DMC-GH4_PPC-VQT5H68_eng.book 74 ページ ２０１４年３月１２日 水曜日 午後１０時３５分