Cleaning primary filter – Panasonic MC-UL425 User Manual

Page 40

Advertising
background image

- 40 -

Cleaning Primary Filter

Dust Bin Lid Latch

Loquet du couvercle
du godet à poussière
Cierre de

Dust bin

lid latch

tapa del

compartimiento
de polvo

Dust Bin Lid

Couvercle du
godet à poussière
Tapa del
compartimiento
de polvo

Primary Filter

Filtre primaire
Filtro primario

It is recommended to clean the filter
with cold water at least every three (3)
months. Check the primary filter
frequently and clean when dirty.

Turn off and unplug the vacuum

cleaner.

Remove dust bin (See EMPTYING

DUST BIN, p. 34).

Pull the dust bin lid latch and open

the lid.

Remove the primary filter.

Wash with cold water only, DO NOT

use detergent or soap.

Once the filter is washed clean,

squeeze by hand and allow to air
dry.

Allow filter to dry for 24 hours

before placing back into vacuum
cleaner.

NOTE: When the cleaning of the filter
no longer restores vacuum cleaner
suction to full power, replace the filter.

DO NOT operate without primary filter
installed.

DO NOT wash in the dishwasher.

DO NOT install damp.

Primary Filter

Filtre primaire
Filtro primario

TO REPLACE FILTER

Place the primary filter into the dust

bin lid.

Close the dust bin lid. Be sure the

lid snaps in place. A noticeable
“click” should be heard.

Reinstall the dust bin into the

vacuum cleaner (See EMPTYING
DUST BIN, p. 36).

Advertising