Panasonic MC-UL425 - Manual (Page 50)

Removing Clogs
Hose
Tuyau
Manguera
Hose Inlet
Entrada de la
manguera
Entrée du tuyau
If the vacuum cleaner does not seem to
have adequate suction, first check if
the dust bin is full or if a filter is
clogged.
➢ Turn off and unplug the vacuum
cleaner.
➢ Remove dust bin and check for
clogs.
➢ Check the hose inlet area.
➢ Visually inspect the tools, the hose,
and the hose holder area into which
the hose is connected.
➢ Check the suction inlet area.
➢ Remove any visible clog.
➢ Plug in the vacuum cleaner and turn
it on.
➢ Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢ If the dust bin and filter areas and
the hose areas are free of clogs,
check the nozzle area.
- 50 -