Panasonic HX-A100D - Manual (Page 39)

- 39 -
∫ About Line quality for Live broadcasting
Set the Line Quality from the following.
When [AUTO] is set, the line quality is checked and is automatically set to one of the options.
(When broadcasting motion pictures or sound are interrupted or the line is disconnected, set the line
quality according to your communication environment.)
*1 Recommended optimal speed (upstream) for the broadband line, mobile router (tethering), etc.
connected to this unit (For information on the optimal speed, contact your service provider, etc.)
*2 Frame rate in parentheses are when recorded simultaneously.
≥ Depending on the line state, images or sound may be interrupted or the line may be
disconnected. Set the line quality by referring to the values of the recommended optimal speeds
(upstream) above as an approximate guide.
≥ Operation cannot be guaranteed for all devices.
≥ Even with a broadband line, the recommended optimal speed may not be reached depending on
your environment.
≥ Narrowband lines such as analog modems cannot be used.
≥ If the line is switched while using mobile router, etc., communication may be interrupted.
≥ Check your contract details carefully, as broadband contract details may result in high
communication charges being incurred, or a limit placed on communication traffic.
Line Quality
Recommended
optimal speed
(upstream) *1
Motion pictures
Audio
Resolution Frame rate *2
High pic. quality 3Mbps or more 1280 k720 5 to 30 fps (5 to 10 fps) 128kbps
Medium pic.
quality
1Mbps or more 640 k360 5 to 30 fps (5 to 10 fps) 128kbps
Low pic. quality 500kbps or more 320 k176 5 to 30 fps (5 to 15 fps) 32kbps