Panasonic SC-MAX670 - Manual (Page 10)

VQ
T5
F
3
5
10
Bluetooth ®
You can connect and play an audio device wirelessly
through Bluetooth
® .
• Refer to the operating instructions of the Bluetooth ®
device for details.
• If you intend to use an NFC (Near Field
Communication)-compatible Bluetooth ® device,
proceed to “One-Touch Connection (Connecting by
NFC)”.
• Decrease the volume before connect the Bluetooth ®
device.
Preparation
• Turn on the Bluetooth
® feature of the device and place
the device near this unit.
1 Press and hold [ -PAIRING] on main unit.
2 Select “SC-MAX670” from the Bluetooth ® menu
of the device.
The device connects with this system automatically
after pairing is complete.
3 Start playback on the Bluetooth ® device.
For other operations on main unit, refer to “Playing disc”.
Note:
• You can also operate with the remote control.
1 Press [ ] to select “BLUETOOTH”.
2 Press [PLAY MENU] to select “PAIRING”.
3 Press [
2, 1] to select “OK? YES” and then press [OK].
4 Select “SC-MAX670” from the Bluetooth ® menu of the
device.
• If prompted for a passkey, input “0000”.
• A device must be paired to connect.
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
• This system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected device.
For NFC-compatible Android TM devices only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
® device by the
unit, you can complete all preparations, from registering
a Bluetooth
® device to establishing a connection.
Preparation
• Turn on the NFC feature of the device.
• Android device version lower than 4.1 requires the
installation of the app “Panasonic MAX Juke” (Free of
charge).
1
Enter “Panasonic MAX Juke” in the search box of
Google Play
TM to search, and then select
“Panasonic MAX Juke”.
2 Start the app “Panasonic MAX Juke” on the device.
- Follow on-screen instructions on your device.
- Always use the latest version of the app.
1 Touch and hold your device on the NFC touch
area of this unit [ ].
• Once the registration and connection of the
Bluetooth ® device is complete, the name of the
connected device is indicated on the display. Move
the device away from the unit.
• When the connection is not established even if
your device has touched the NFC touch area,
change its touching position.”
2 Start playback on the Bluetooth ® device.
Note:
• If you touch another device to this unit, you can update the
Bluetooth ® connection. The previously connected device
will be disconnected automatically.
• If the image and sound are out of sync during playback,
restart the playback app you are using. If the problem
persists, connect the Bluetooth
® device and this unit with
an audio cable (not supplied).
• When the connection is established, the playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
If you enable this function, even when the main unit is
turned off, it will turn on automatically when a Bluetooth
®
device sends a connection request.
1 Press [ ] (main unit: [ -PAIRING]) to select
“BLUETOOTH”.
2 Press [PLAY MENU] to select “STANDBY
MODE”.
3 Press [ 2, 1] to select “ON STANDBY MODE” or
“OFF STANDBY MODE” and then press [OK].
You can view the following information on the display
panel:
• Name of the connected device (maximum
16 characters).
• Bluetooth ® profile used.
Press [DISPLAY].
Pairing a device
One-Touch Connection
(Connecting by NFC)
Bluetooth ® device
Bluetooth ® standby mode
Viewing available information
SC-MAX670P_eng.book 10 ページ ２０１４年２月２６日 水曜日 午後５時４９分