Panasonic MC-UG725 - Manual (Page 40)

- 40 -
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Removing and Installing Lower Plate
Lower Plate
Plaque inférieure
Base inferior
Belt Cover
Couvercle de la
courroie
Cubierta de
la correa trasera
Latches
Loquets
Lengüetas
➢ Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢ Place paper under nozzle whenever
lower plate is removed to protect
floor.
➢ Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ Release lower plate by pressing two
(2) latches inward.
➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ Lift belt cover to replace belt if
necessary. (See Replacing Belt page
42).
➢ Close the rear belt cover and
reinstall lower plate by hooking front
end of lower plate into the front of
nozzle housing.
➢ Press lower plate into place then
push two (2) latches outward.
Belt Cover
Couvercle de la
courroie
Cubierta de
la correa trasera
Tabs
Languettes
Lengüetas
Lower Plate
Plaque inférieure
Base inferior
Latches
Loquets
Lengüetas