Identifying controls – Panasonic TY-EW3D2SU User Manual

Page 5

Advertising
background image

ENGLISH - 5

Identifying Controls

(Shown as TY-EW3D2MU)

„

„

Liquid Crystal Shutter

(lens)

Controls the images for 3D

viewing.

The left and right liquid crystal

shutters are alternately opened

and closed in time with the left

side and right side images that

are alternately displayed on the

television to achieve the 3D effect.

„

„

Infra-red receiver

Receives infra-red signals from the television.

The liquid crystal shutter open/close timing is controlled by receiving

infra-red signals from the television, which provide 3D expression of

the images.

If the eyewear stops receiving infra-red signal from the television, the

power automatically switches off after 5 minutes.

„

„

Power switch (bottom side

of 3D Eyewear)

Switches on the 3D Eyewear power.

The 3D Eyewear is turned on by

setting the power switch to “ON”. Set

the power switch to “OFF” to turn off

the 3D Eyewear.

„

„

Indicator lamp

Lights or flashes during use or

charging to show the status of

the rechargeable battery.

„

„

Charging port

Connect the chaging cable.

(

page 9)

„

„

Battery status shown by indicator lamp

Power/indicator lamp status

Battery status

Lights for 2 seconds when turned on

Sufficient battery level

Flashes 5 times when turned on

Low battery level

Flashes once every 2 seconds when in use

Operating normally

Lights continuously when off

Charging

Lamp off

Power off

Advertising