Panasonic MC-CL935 - Manual (Page 20)

- 20 -
Adjusting the Handle
Handle
Release Pedal
Pédale de
dégagement de
l’inclinaison du manche
Pedal de liberación del mango
Pile Height
Pedal
Pédale de réglage de
la hauteur des brosses
Pedal de selección de
nivel de pelo de la alfombra
Pile Height Indicator
Indicateur de la hauteur
des brosses
Indicator de nivel de
pelo de la alfombra
➢ Lower wand from upright position by
pressing on the handle release pedal.
➢ Select a pile height setting by press-
ing the small pedal on the rear of the
Power Nozzle. The pile height setting
shows on the indicator.
SUGGESTED PILE HEIGHT SETTINGS:
For best deep down cleaning, use the
XLO setting. However, you may need to
raise the height to make some jobs
easier, such as scatter rugs and some
deep pile carpets, and to prevent the
vacuum cleaner from shutting off.
Suggested settings are:
HI – Shag, deep pile, or scatter rugs.
MED – Medium to deep pile.
LO – Low to medium pile.
XLO – Most carpets and bare floors.
Attention: Refer to your carpet
manufacturers cleaning
recommendations. Some more delicate
carpets may require that they be
vacuumed with the Power Nozzle agitator
turned off to prevent carpet damage.
Suction Control
Decrease Suction
Diminution de
l’aspiration
Disminuir
aspiración
Increase Suction
Augmentation
de l’aspiration
Aumentar
aspiración
➢ Suction control allows you to
change vacuum cleaner suction for
different fabric and carpet weight.
➢ Opening control decreases suction
for draperies and lightweight rugs.
➢ Closing control increases suction
for upholstery and carpets.