Panasonic KX-HCM110A - Manual (Page 50)

Operating Instructions
50
5. Click [Restart].
• The camera restarts, and the Top page is displayed.
Note
• When you do not know the camera IP address while setting [Automatic
Setup], you can search it by using the Setup Program (see page 160). Or
you can search it on the Status page (see page 135) after accessing the
camera in IPv4.
• If the camera is restarted, all buffered images on the internal memory are
deleted.
Setting Description
Allow Access from
the Internet
(Automatic Setup
Only) • If [Yes] is selected at the Allow Access from the Internet,
you can access the camera from the Internet. If [No] is
selected, the camera can be accessed only from the LAN
that has the same IPv6 prefix as the camera.
Port Number (Static
Only) • The port number is 80 by default. The port number must be
unique for each terminal on your network.
• Do not set the following port numbers.
E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,
POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661—
6667.
• Enter only the number (1—65535).
• Some ISPs do not allow you to use port 80. Ask your ISP
or network administrator about the accessible port number
over the Internet.
IP address
(Static Only) • Enter a global address. You do not need to enter prefix
length.
• IPv6 address consists of 8 hexadecimal digits divided with
":". Consecutive 0s can be abbreviated as "::".
(E.g. 2001:2:3:4::5)
Default Gateway
(Static Only)
• If you have the assigned Default Gateway IPv6 address by
your ISP or network administrator, enter it in this data field.
• IPv6 address consists of 8 hexadecimal digits divided with
":". Consecutive 0s can be abbreviated as "::".
(E.g. 2001:2:3:4::5)