Saving your pictures (cards and built-in memory), Saving your pictures, Cards and built-in memory) – Panasonic DMC-LF1W User Manual

Page 20: Preparations

Advertising
background image

Preparations

Saving your pictures (cards and built-in memory)

VQT5A33

- 20 -

Pictures will be saved to a card if one is inserted, or to the built-in memory if not.

Built-in memory (approx. 87 MB)

Pictures may be copied between cards and the built-in memory.

(→169)

The access time for the built-in memory may be longer than the access time for a

card.

Compatible memory cards (optional)

The following SD standard-based cards (Panasonic brand recommended) can be used.

Type of Card

Capacity

Notes

SD Memory Cards

8 MB – 2 GB

•Can be used with devices compatible with the

respective formats.

•Before using SDXC Memory Cards, check that

your computer and other devices support this type

of card.

http://panasonic.net/avc/sdcard/information/SDXC.html

Use a card of SD Speed “Class 4”

*

or higher for

recording motion pictures.

•Only the cards listed on the left with the given

capacities are supported.

SDHC Memory Cards

4 GB – 32 GB

SDXC Memory Cards

48 GB, 64 GB

*

SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by

checking the card label or other card related materials.

(Example)

•Latest information:

http://panasonic.jp/support/global/cs/dsc/

(This site is available in English only.)

While the camera is accessing the card or built-in memory (for an operation such as

picture writing, reading, deleting, or formatting), do not turn off the camera or remove

the battery, card, AC adaptor (supplied). Do not subject the camera to vibrations,

impact, or static electricity. The card or the data on the card may be damaged, and

this unit may no longer operate normally. If operation fails due to vibration, impact or

static electricity, perform the operation again.

Please reformat the card with this camera if it has already been

formatted with a computer or another device.

(→64)

If the write-protect switch is set to “LOCK”, the card cannot be used to

record or delete pictures, and it cannot be formatted.

It is recommended that you copy important pictures to your computer

(as electromagnetic waves, static electricity, or faults may cause data

to be damaged).

Switch

Advertising