Panasonic DMC-LF1W User Manual
Page 246
Connecting with other devices
Viewing on TV screen
VQT5A33
- 246 -
■
To switch the playback method for the still pictures recorded in 3D
Select the picture recorded in 3D
Select [2D/3D Settings] on the [Playback Mode] menu and then press [MENU/SET]
•Playback method will switch to 3D if it is playing back in 2D (conventional image), or it
will switch to 2D if it is playing back in 3D.
•If you feel tired, uncomfortable or otherwise strange when playing back pictures
recorded in 3D, set to 2D.
●
Viewing 3D still pictures too close to a TV may cause eyestrain.
●
When an image is not suitable for 3D viewing (due to excessive parallax, etc.)
•During Slide Show playback: The image is displayed in 2D.
•During [Filtering Play]: A message appears confirming whether to display the image
in 3D or not.
●
When a 3D image is played back on a TV that is not 3D-capable, 2 pictures may
appear side-by-side on the screen.
●
On the LCD monitor of this camera, 3D still pictures will be played back in 2D
(conventional pictures).
●
If you switch between 3D still pictures and normal still pictures while playing back
pictures, a black screen will be displayed for a few seconds.
●
If you select a thumbnail of 3D still pictures or display a thumbnail after playing back
3D still pictures, it may take a few seconds to start playing back or displaying the
pictures.
●
When a TV has not been converted for viewing 3D still pictures, do necessary
preparation on the TV. (For details about the necessary preparation of the TV, read
the manual for the TV.)
●
During 3D playback, the [Wi-Fi] menu, [Setup] menu, [Playback] menu, Playback
Zoom, and delete operation cannot be used.
●
You can store 3D still pictures on a computer or Panasonic recorder.