AT&T Plug&Share 6800G - Manual (Page 17)

Basic System Settings
AT&T Plug&Share ™ 54 Mbps Wireless Router 6800G 17
ISP Connection Type
At this screen you must choose an Internet connection type compatible with your Internet Service
Provider (ISP). If you are unsure which to choose, contact your ISP. When you make a selection, the
screen will change to show options available for that connection type (see next page).
Basic > Advanced > Admin > Status > Shortcuts > Help
• Dynamic IP Address: Cable modems usually require this setting. Choose this setting if you don't have
to log on to the Internet when you've turned on your computer, and if your ISP assigns your IP
address.
• PPPoE: DSL modems usually require this setting. Choose this setting if you have to log on to the
Internet when you turn on your computer.
• Static IP Address: This setting is rarely required. Contact your ISP before choosing this option.
Wizard
Wireless
ISP Connection
DHCP