Panasonic TYWK42PR7 - Manual (Page 3)

9
English
Components
Points to note during installation
•
The wall-hanging bracket is for use in installing the Plasma Display to a vertical wall for viewing
purposes. Do not use it for any type of installation other than vertical wall installation.
•
In order to ensure correct, problem-free operation of the Plasma Display , do not install the
Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
When installing this wall-hanging bracket unit, use a fixing method appropriate to the type
of wall.
•
Use an M6 bolt (sold separately) appropriate for the type of wall material (wood, steel
frame, concrete, etc.) the bracket is to be mounted on.
•
Keep retention screws and power cord away from any metallic parts or structures within
the wall.
•
Insert the power cord plug for the Plasma Display into a wall outlet which is close and
easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise
above 40°C (104 °F). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
Wall-hanging bracket unit..................................................1 Allen key (accessory) ......1
Fixing screw
(M5-35) ............................2
Insulating spacer
....................................4
Toothed pan washer
....................................4
Pan head bolt with
hex socket (M8-45) .........4