Panasonic ES2058 - Manual (Page 3)

4
English
5
English
Before use
Wet/foam epilation
Using
Do not use the epilation head for legs/arms to epilate your underarms
and bikini-line.
Trim your hair before epilating for the fi rst time or if you have not epilated
for a long time.
If you use the appliance in temperature of 15 °C or less, the operating
time might be reduced. •
•
1. Wet your skin.
2. Remove the cap and attach the head you wish to use.
3. Wet the discs and place a small quantity of liquid body
soap on the discs.
4. Turn the switch on to the 1 or 2 position and then
epilate. (1=low speed epilation/2=high speed epilation)
Foam makes the epilator slide better, so you can move it fast. Always
wash the discs well after use to remove any residual soap.
Dry epilation
You can also epilate without wetting your skin or the discs.
Before use
For best epilation results
Using
90˚
Apply the epilator at a right angle to your skin
and press gently while moving it slowly
against the hair growth.
When using the appliance, pull your skin taut
where the area is prone to sagging (on the inside
of the knees and elbows).
Rub your skin to lift short hair.
Move the epilator with the side that has the foam keeper facing the front.
Do not remove the frame of the epilation head.
Do not use if your hair is longer than 5 mm.
Reddening might appear for your fi rst use. Cool towel will help if you feel
pain or there is a rash.
We recommend regular use of massage sponges or exfoliation to prevent
ingrown hair.
•
•
•
•
•
•
•
•
 
 
Moving the appliance correctly
 Legs: Upwards from the bottom of the
leg.

Arms: Inwards from the outside of the
arm.

Upper arms: Upwards from the bottom
of the upper arms.

Underarms: Move in several directions
as underarm hair grows in different
directions.
Before use
Wet/foam Shaving ES2058
Shaving
1. Attach the shaver head.
2. Wet your skin.
Shaving with soap lather makes the skin slippery for a closer shave.
Do not use shaving cream, skin cream or skin lotion as it will clog the
blades.
3. Turn the switch on to the 1 or 2 position.
(1=low speed shaving/2=high speed shaving)
Hair removal is easier and less painful when the hair is short.
Slide the pop-up trimmer switch up to cut long hair.
Press gently so that the whole of the blade is in close contact with the
skin and the surface of the blade does not move up and down.
Shaving the bikini line with the bikini comb
Place the bikini comb onto the shaver head and slide trimmer up.
When the bikini comb is in place, make sure the comb is in close contact
with the skin.
Dry shaving
You can also shave without wetting your skin or the discs.
Before use
Cleaning the epilator
Cleaning
Switch off and unplug the appliance before cleaning.
Always unplug the charger from a household outlet and from the epilator
before cleaning the appliance.
Wipe the main body only with a dry cloth. The use of alcohol etc. might
•
•
•
•
•
•
•
•
4-5 2007/10/30 18:04:13