Panasonic ES2058 - Manual (Page 4)

6
English
7
English
cause discoloration or deformation of the main body.
Always attach the caps when storing the epilator.
Washing your epilator
Always clean the frames and discs after use to keep them in a hygienic
state.
Take care not to damage the skin protector during cleaning.
1


2-4
1. Remove the frame by pushing the frame release button.
2. Apply liquid hand soap to the discs and blade.
3. Turn the switch on and then wet the discs to create foam.
4. Wash the head with water to clean hair.
Do not use hot water.
If soap is not completely washed away, then a white deposit can
accumulate and prevent the blades from moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth and dry it well.
Cleaning your epilator with the supplied brush
You can also clean the epilation head and the shaver head ( ES2058 )
with the cleaning brush.
•
•
•
•
Before use
Replacing the outer foil ES2058
Replacing
Replace the shaving foil and the inner blade when you notice reduced
shaving performance. Never remove the outer foil of the shaver head for any
other reason than to change it.
Removing the outer foil
While pushing the outer foil gently with the fi ngers, use a fi ngernail to
release the plastic panel  on the blade from the catches  on the inside
of the frame.
 
Fitting the new outer foil
Hold the outer foil so that the surface with the plastic panel  (i.e. the
surface that will come into contact with the inner blade) faces upward and
then insert it into the frame so that the catches  on the frame fi t into the
holes on the foil.
We recommend replacing the outer foil every year and the inner blade
every two years.
For environmental protection and recycling of materials
This epilator contains Ni-MH batteries.
Please make sure that the battery is disposed of at an offi cially assigned
location, if there is one in your country.
•
6-7 2007/10/30 18:04:14