Turning the handset ringer off temporarily, Tone signalling, Setting the key lock – Panasonic KXTD7580CE User Manual
Page 5
5
Clearing the Number in the Redial Memory
Adjusting the Receiver/Speaker Volume
●
The ringer will turn back on for the next call.
●
This function will not work when the handset is on the charger.
●
The key lock will also be cancelled when the power is turned OFF (p. 3).
To clear the selected number
To clear all numbers
/
Select the redial
number.
/
Select "Clear."
Select "YES."
/
Select "All Clear."
/
While talking
(to increase)
(to decrease)
Turning the Handset Ringer off Temporarily
While ringing
(press and hold.)
Select "TONE."
Tone Signalling
During an outside call or while dialling, you can transmit tone signals
automatically using the keypad (e.g., to control answering system remotely).
/
To set
(press and hold.)
Setting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until
the key lock is cancelled. While locked, "[X]" will be shown on the display.
To cancel
(press and hold.)
English