American Standard ELITE 4454 User Manual

Elite, Installation instructions, Single control kitchen faucet and hand spray

Advertising
background image

4453 SERIES
4454 SERIES

ELITE

Installation

Instructions

M968202 REV.1.2

Certified to comply with ANSI A112.18.1M

1

INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON

CAUTION

Turn off hot and cold water
supplies before beginning.

SINGLE CONTROL KITCHEN FAUCET

and HAND SPRAY

1

2

8

A

B

P U T T Y

S P O U T B A S E

S P O U T B A S E

S Q U A R E
S E A L R I N G

8

S Q U A R E
S E A L R I N G

4

S I N K O R

M O U N T I N G

S U R FA C E

2

3

4

5

6

7

9

3

0

1

2

3

4

5

6

Assemble RUBBER WASHER (5), BRASS WASHER (6), and threaded LOCKNUT (7) onto SHANK (4) from underside
of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8) from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening
the screws slightly each time until all are snug to ensure even pressure.

(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON WITH PUTTY PLATE (1).

Insert supply HOSES (3) and SHANK (4) through hole of ESCUTCHEON WITH PUTTY PLATE (1) and mounting surface.

Make certain the SQUARE SEAL RING (2) is properly seated in recess of SPOUT BASE. Follow mounting instructions below
to secure faucet to mounting surface.

(B)

Installation less ESCUTCHEON (1). Remove ESCUTCHEON WITH PUTTY PLATE (1) and

Insert supply HOSES (3) and

SHANK (4) through mounting hole and

seat SPOUT BASE onto sink or mounting surface.

Make certain the SQUARE SEAL

RING (2) is properly seated in recess of SPOUT BASE. Do not use putty.

CARE:

5

6

7

9

Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.

TOOLS REQUIRED

Plumbers' Putty or Caulking

Adjustable Wrench

Channel Locks

Regular Screwdriver

Phillips Screwdriver

Advertising
This manual is related to the following products: