Audiovox VI600 - Manual (Page 30)

Using One-Touch/Two-Touch Speed Dialing
With this feature, you can dial Speed Dial entries using one key press
for locations 2-9 or two key presses for locations 10-20.
To use One-Touch Dialing for Speed Dial locations 2-9:
Ⅵ Press and hold the appropriate key for approximately two
seconds. (The display confirms that the number has been dialed
when it shows “Calling...”.)
To use Two-Touch Dialing for Speed Dial locations 10-20:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds.
(The display confirms that the number has been dialed when it
shows “Calling...”.)
Note: Speed dialing is not available when you are roaming with Call Guard
enabled.
Tip: is used for One-Touch voicemail dial feature.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 22