Audiovox VI600 - Manual (Page 82)

Section 2: Understanding Your PCS Phone
2I: Using Your Phone’s Voice Services 74
Erasing Voice Memos
To erase all voice memos:
1. Press (Menu) to access the main menu.
2. Select Voice Svc. ( ).
3. Select Voice Memo ( ).
4. Select Erase All ( ).
5. Press .
Using Voice-Activated Dialing
In addition to PCS Voice Command SM (see page 110), you can use a
Voice Dial entry to automatically dial a phone number in your internal
Phone Book. Your phone can store up to 20 Voice Dial entries.
To use a Voice Dial entry to call a phone number:
1. Press and hold until your phone turns to Voice Dial mode.
2. Follow the voice prompt and recite the entry's Voice Dial entry
into your phone's microphone.
Note: Record Voice Dial entries without the aid of an accessory (for example, a
headset or hands-free car kit).
Programing Voice Dial Entries to Your Phone
To program a Voice Dial entry:
1. Press (Menu) to access the main menu.
2. Select Voice Svc. ( ).
3. Select Voice Dial ( ).
4. Select Record ( ).
5. Select Select Name with the Navigation key and press . (The
phone will prompt you to say the name you want to program.)
6. Respond to the prompt by repeating the name after the beep.
(The display shows “Voice Dial Entry saved successfully”.)