Actiontec electronic HPE400T - Manual (Page 22)

18
Actiontec MegaPlug 4-Port Hub User Manual
19
Chapter 5 Setting Up Static IP Address
5. The “Network” window appears. In the “The following network components
are installed” list box, locate and double-click TCP/IP .
6. The “ TCP/IP Properties” window appears. Select IP Address.
7. In the IP Address tab, make sure the circle next to “Specify an IP Address” is
selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
8. Enter the following numbers in the “ IP Address” text box:
192.168.0.2
Press the space bar on the keyboard to add the periods between the numbers.