ArtDio IPF-2600 - Manual (Page 16)

IPF-2600 User’s Manual/
使用手冊 使用手冊 使用手冊 使用手冊
16
3.2.1 3.2.1 3.2.1 3.2.1 Multiple incoming calls Multiple incoming calls Multiple incoming calls Multiple incoming calls
IPF2600 support 2 Line incoming calls , Orange LED; will flash for incoming calls and lights up when
the call is connected, it will light up when the call is on Hold.
3.2.2 3.2.2 3.2.2 3.2.2 Making Calls Making Calls Making Calls Making Calls
There are three ways to make phone calls:
1. Pick up Handset /press Speaker Key, or press the available LINE (L1/L2) key the corresponding LINE
LED will light up in Orange. Enter the phone numbers and press the “#” key (default IP mode),if
Default is PSTN mode could direct input target PSTN number.
2. Pick up Handset /press Speaker Key, or press the available LINE (L1/L2) key the corresponding LINE
LED will light up in Orange Press the “Redial” button to redial the last Dialed number (default PSTN
mode)
Note:
If the last number is PSTN number, could not call out at Default IP mode.
3. Pick up Handset /press Speaker Key, or press the available LINE (L1/L2) key the corresponding LINE
LED will light up in Orange. Press the Speed Dial key to call the preset calling party number.
Note:
• Once pressed, the dialed number is displayed on the LCD as the corresponding DTMF tone is
played out.
• If the “#” button is not pressed after the phone number, the phone will wait for “3-9” seconds
before initiating the call.
3333....2222....3333 Making Calls using IP Address Making Calls using IP Address Making Calls using IP Address Making Calls using IP Address
Direct IP calling allows two phones to talk to each other in an ad hoc fashion without a SIP proxy.
VoIP calls can be made between two phones if
• Both phones have public IP addresses, or
• Both phones are on a same LAN using private or public IP addresses, or
• Both phones can be connected through a router using public or private IP addresses.
To make a direct IP calling, first pick up the phone or turn on the speakerphone, then input the 12-digit target
IP address followed by “#”
Examples:
If the target IP address is 192.168.1.160, the dialing convention is 192*168*001*160#.
3333....2222....4444 Receiving Calls Receiving Calls Receiving Calls Receiving Calls
There are two states when IPF2600 receives a call:
1. When receiving an initial call. Besides ringing with selected Ring Tone, the corresponding LINE will flash,
taking Handset/SPEAKER/Headset off hook or press “Speaker” Key will enable user to hear the calling party
in Handset/SPEAKER/Headset.
2. When receiving second incoming calls, besides playing stutter Call Waiting tone.
The other Line LED will flash, pressing “Hold” Key or L1/L2 Key will enable user to hear the calling party in
Handset/SPEAKER/Headset., the mean time the first incoming call will be hold.
3333....2222....5555 Call Hold Call Hold Call Hold Call Hold
While in conversation, pressing the “HOLD” button will put the other party on hold. User can resume
the conversation by pressing the corresponding LINE. User will also automatically put the current line on
“HOLD” by pressing another available LINE for making or receiving other phone calls.