ArtDio IPF-2600 - Manual (Page 20)

IPF-2600 User’s Manual/
使用手冊 使用手冊 使用手冊 使用手冊
20
4.4 4.4 4.4 4.4 Network Network Network Network Setting Setting Setting Setting
4.4.1 4.4.1 4.4.1 4.4.1 WAN Setup WAN Setup WAN Setup WAN Setup
1 ．IP Type IP mode type ：
Fixed IP client
：set fixed IP address
DHCP client
：Obtain IP address automatically from DHCP server
PPPoE client
：PPPoE dial-up setting
NAT setting: enable NAT function
（setting is done through the
website ）
2 ．Fixed IP setting Fixed IP address ：
Host IP
：host IP address（“*” indicates the “.”in the IP address）
Network mask: set submnet mask IP address
Gateway IP
：set gateway IP address
MAC address
：set MAC address
3
．PPPoE Setting
PPPoE setting
：
User name ：Enter PPPoE user ID
Password
：Enter PPPoE password
4.4.2 LAN Setup 4.4.2 LAN Setup 4.4.2 LAN Setup 4.4.2 LAN Setup
Bridge ON/OFF Bridge function
NAT ON/OFF Router function
4.4.3 DNS 4.4.3 DNS 4.4.3 DNS 4.4.3 DNS
Primary DNS Mostly DNS Setting
Secondary DNS Secondary DNS Setting
4.4.4 VLAN 4.4.4 VLAN 4.4.4 VLAN 4.4.4 VLAN
Activation ON/OFF VLAN function
VID Default is 136, Virtual LAN Server setting , VLAN Identifier
(Virtual LAN ID. Name VLAN ID or VID).
Priority
Default is 0, user priority Setting , user priority(0-7)
CFI Default is 1, Canonical Format Indicator (CFI).
CFI=1: head of the packet contains spaces RIF , And the NCFI Flag
which inside RIF decision information is carried by MAC address.
"Standard format" (Canonical Format) or "non-standard format"