Alvarion BREEZEACCESS SW VERSION 5.1 - Manual (Page 113)

Operation Verification
Commissioning
81
Table 3-5: SU-ODU LEDs
Name Description Functionality
W-LINK Wireless Link
Indictor
„ Green – Unit is associated with an AU,
no wireless link activity
„ Blinking Green – Data received or
transmitted on the wireless link.
Blinking rate is proportional to wireless
traffic rate
„ Off – Wireless link is disabled
Status Self-test and power
indication
„ Green – Power is available and
self-test passed.
„ Blinking Amber – Testing (not ready for
operation)
„ Red – Self-test failed – fatal error
ETH Ethernet activity/
connectivity
indication
„ Green – Ethernet link between the
indoor and outdoor units is detected,
no activity
„ Blinking Green – Ethernet connectivity
is OK, with traffic on the port. Blinking
rate proportional to traffic rate.
„ Red – No Ethernet connectivity
between the indoor and outdoor units.
SNR BAR
(SU-RA)
Received signal
strength Indication
„ Red LED: Signal is too low
(SNR<4 dB)
„ 8 green LEDs: Quality of the received
signal
„ Orange LED: Signal is too high
(SNR > 50 dB)