Panasonic 616 - Manual (Page 75)

75
Step 3
Click "Network Connections".
→ The "Network Connections" window will be dis-
played.
Step 4
Double-click "Local Area Connection".
→ The "Local Area Connection Properties" window
will be displayed.
Step 5
Click "Properties".
→ The "Local Area Connection Properties" window
will be displayed.
Step 6
Click "Internet Protocol (TCP/IP)", and then click
"Properties".
→ The "Properties" window of "Internet Protocol
(TCP/IP)" will be displayed.
Step 7
Click "Use the following IP address" and enter the IP
address and the subnet mask as follows.
• IP address: 192.168.0.9
• Subnet mask: 255.255.255.0
Depending on the network configuration, it is neces-
sary to configure the default gateway. Refer to a sys-
tem administrator for further information about the
settings.
Step 8
Click the [OK] button and close the window.