Panasonic 616 - Manual (Page 38)

38
Image data Monitor 2
Hard disk drive
Recorder
Play recorded images
Images recorded on the recorder will be displayed on monitor 2.
Playback images will be displayed on monitor 2. Playback operation can be made while recording.
Operation using the buttons on the front panel
Step 1
Press the [PLAY/PAUSE] button.
→ The [PLAY/PAUSE] button will light and playback
of images recorded using the selected camera
channel will start.
The playback start point varies depending on how
many times playback is performed after the login as
follows.
• The first playback after logging in to the
recorder
The latest recorded image will be played. The
playback start point can be set on the setup menu
("Latest image position" on the "Basic" tab under
"Basic") (☞ Installation Guide). "30 seconds
before the latest" is selected at the default.
• Other than above (The second and subsequent
playback after logging in to the recorder.)
Playback will start from the point at which the last
playback was stopped (time and date).
Operations using a mouse
Step 1
Click the [S.Menu] button.
→ The submenu window will be displayed.
Step 2
Click the [REC & Playback] button.
→ The REC & playback control panel will be dis-
played.