Panasonic 616 - Manual (Page 51)

51
Search for time and date when a motion was detected from
recorded images and play (VMD search)
Display a list of time and date when a motion was detected (by the VMD function) from images recorded by all
the recording modes (☞ page 37), and then select a desired recorded image to play from the list.
Camera channels, time and date when a motion was detected, detection area and detection sensitivity can be
used as the filters for the VMD search.
VMD search list window
[VMD search] button
Displays the search filter window on which the search
filters can be specified.
[Select Medium] button
Displays the disk selection window on which a media
(HDD, DVD, SDHC/SD memory card) subject to play
can be selected.
Time & date
The time and date when the images were recorded
will be displayed.
Ch
Displays the camera channel used for recording.
Playback of images recorded using the displayed
camera channel will start on a 1-screen.
Event
Displays the event type. Refer to page 8 for further
information about the event type.
HDD
Displays the hard disk drive number on which images
were recorded.
Audio
Displays the icon to indicate whether audio is
attached to the data or not.
Number of the listed data
Displays a time and date range of the listed data.
Number of the listed data (Total)
Displays the total number of listed data. When more
than 200 data matched, the ">200" indication will be
displayed.
[Prev page] button
Displays the previous page.
[Next page] button
Displays the next page.
[ B] (play) button
It is possible to play the selected recorded image.