Panasonic 616 - Manual (Page 71)

71
Disk management
Step 1
Press the [SUB MENU] button.
→ The submenu window will be displayed.
Step 2
Move the cursor onto the [Setup Menu] button, and
then press the [SET] button.
→ The setup menu will be displayed.
Step 3
Move the cursor onto "Maintenance", and then press
the [SET] button.
→ The [Product information] tab of "Maintenance" of
the setup menu will be displayed.
On the [Disk] tab of "Maintenance" of the setup menu, it is possible to perform operation relating to the hard
disk drives in the recorder or in an optional extension unit and SDHC/SD memory card.
The following are descriptions of how to delete images recorded on the hard disk drives and of how to format
(initialize) an SDHC/SD memory card.
Delete images recorded on the hard disk drives manually
The following are descriptions of how to manually delete images recorded in the normal recording area and the
event recording area on the hard disk drives in the recorder.
By designating a time and date, all the images recorded until the day before the designated time and date will
be deleted. It is useful to delete unnecessary images.
Important:
• Note that the deleted images cannot be recovered and the remaining disk capacity will not increase even
though deletion is performed.
Note:
• It is possible to delete recorded images automatically when the set days have passed from the day the
image was recorded (HDD auto deletion). Refer to the Installation Guide for further information.