Panasonic 616 - Manual (Page 83)

83
• When the [Time slip] button or the [Reverse time
slip] button is clicked, the start point after the
jump may sometimes be at a point several sec-
onds later than the supposed point.
[PAUSE] button
Playback will be paused when this button is clicked
during playback. Playback will resume when this but-
ton is clicked during pausing.
[STOP] button
Stops playback and displays live images.
[NEXT IMAGE] button
The next frame will be displayed when this button is
clicked during pausing.
[PREV. IMAGE] button
The previous frame will be displayed when this button
is clicked during pausing.
[Go to last] button:
Click this button to skip to a point that is the start
time of the latest recorded image using the camera
channel currently being displayed and start playback.
[Go to date] button:
The "Go to date" window will be displayed by clicking
this button. It is possible to designate the desired
time and date from when playback of recorded imag-
es is to start. (☞ Page 92)
[Rec] box
The recording button and the recording stop button
will be displayed when the button is clicked.
The recording button and the recording stop button
will be hidden when the button is clicked.
(Recording button): Starts manual recording.
(Re cording stop button): Stops manual record-
ing.
Note:
• To display the recording button and the recording
stop button, hold down the button until they
appear.
[CAM] tab
Zoom
Zooming can be adjusted by clicking the [–] button
(wide) or the [+] button (tele).
Note:
• It is possible to adjust zooming using the mouse
wheel.
Focus
Focusing can be adjusted by clicking the [Near] but-
ton or the [Far] button. The auto focus function can
be performed by clicking the [Auto] button.
Control pad/buttons
Clicking the buttons around the control pad can move
(pan/tilt) a camera in the clicked direction.
Clicking inside the control pad also can adjust the
vertical/horizontal position (pan/tilt) of the displayed
live images. Panning/tilting speed will become faster
if a clicked point gets farther from the center point of
the control pad.
Note:
• Clicking on the screen can move (pan/tilt) a cam-
era to the clicked direction.