Actiontec electronic DSL Modem GT701WG-QW04 - Manual (Page 101)

96
Actiontec DSL Modem User Manual
97
Appendix g Alternative System Setup
2. When the “ TCP/IP ” window appears, select Edit from menu bar, then select
User Mode.
3. When the “User Mode” window appears, select Advanced, then click OK .
4. In the “ TCP/IP ” window, select Ethernet from the “Connect via” drop-down
list.
5. Select Using DHCP Server from the “Configure” drop-down list.
6. Ensure the “Use 802.3 ” option is not checked.
7. Disregard any addresses in the IP Address text boxes. They will be reacquired
when the first connection is made.
8. Click Options and when the “ TCP/IP Options” window appears, select Active.
Ensure the “Load only when needed” option is not checked, then click OK .
9. Close the “ TCP/IP ” window and when prompted to save changes, click Save.
10. Restart the computer. The TCP/IP settings are configured.
Next, go to “Connecting to the ISP .”