Setting up static ip address, Configuring for a single static ip address – Actiontec electronic DSL Modem GT701WG-QW04 User Manual

Page 20

Advertising

Setting Up
Static IP Address

This chapter details how to set up the Modem with a static

address. The first

section explains the configuration using a single static

address; the second sec-

tion explains the configuration using a block of static

addresses.

Configuring for a Single Static

Address

To set up the Modem to use a single static

address:

☞

Note: To complete this procedure, you must have access to the

Internet Service Provider (

ISP

) worksheet. If no worksheet has

been provided, contact the

ISP

1. Open the Web browser. In the address bar enter:

http://192.168.0.1

then press Enter on the keyboard.

2. The “Main Menu” screen appears. Select Setup/Configuration.

☞

Note: If the Main Menu screen does not appear, make sure the

Ethernet cable is properly connected.

Advertising