EXONIC EXD 6805 - Manual (Page 18)

Control Panel
-17-
9 (EJECT) BUTTON
Press it button to eject the DISC or insert the DISC to start play .
11 SD/MMC CARD SLOT
8 SELECT BUTTON
Briefly press this button repeatedly to switch between BASS,TRE,BAL,FADER,COLOR,
BRIGHT,CONTR, TINT and VOL; Long press this button to switch BT, then briefly press
this button repeatedly to switch between LOUD, SWF,EQ,DX/LOCAL, STEREO/MONO,
TIME 24H/12H, CLOCK,BUZZ,EUR/USA FREQ,ANIMA and BG; After switching a desired
item above, rotate VOL knob to set.
7 REL BUTTON
Press this button to release the front panel for removal . Refer to see page 7.
10 USB OPERATION
For information about connecting a USB device, please see page 33.
12 MIC
Microphone .
13 RESET BUTTON
Press this button to return to factory settings .
-Store in Memory
> Select the frequency band
> Press repeatedly the button to select the desired memory key .
> Select the station
> Keep the desired memory key pressed in until the station is heard again
after a brief interruption .
The operation as below:
-Retrieve a preset station
press the button repeatedly to retrieve a station which had been stored in the
memory in advance the chose number is shown on display .
6 (POWER On/Off )/MODE BUTTON
Press this button to switch the device on. WELCOME appears in the display.
Press it again to switch the device off. SEE YOU appears in the display.
In playback mode, you can use the button to select the input mode by pressing
repeatedly until the proper one is found :
DISC > AUX IN > RADIO > BT MP3 .
5 /CH 1-6 (RADIO PRESET) BUTTON
A) In Disc Playback Mode
Press this button to pause playback, press it again to resume playback.
B) In Radio Mode
Press this button repeatedly to preset station. With this system a total of 30
stations can be stored in the memory . Each band store up to six preset
stations. The stations might be FM1, FM2, FM3, AM1 (MW1) and AM2
(MW2) band.