TurboChef Technologies Encore EN - Manual (Page 10)

4 SPECIFICATIONS ANd INSTALLATION
Oven Restraint kit
Part Number: TC3-0242
WArNING: The oven restraint Kit will
not prevent the oven from falling off a
countertop if the oven is pulled off or
allowed to slide off the edge. Installation
instructions are included with the kit.
ChefComm Pro
ChefComm Limited
Part Number: CoN-7016
ChefComm Limited TM is a “read-and-upload only”
version of ChefComm Pro that helps ensure menu
settings are easy to distribute, while preventing
them from being changed at the store level.
Oven Connect
oven Connect TM allows you to update menu
settings for multiple ovens at once, from one
central location. oven Connect can also
download oven diagnostics and counters. For
more information on how to network ovens,
see page 11. For information on oven Connect,
contact TurboChef Customer Support at
800.90Turbo or +1 214.379.6000.
voltage Selection
For North America oven models, the oven will
detect 208 or 240 incoming voltage.
If incoming voltage for the store is different than
the factory-preset voltage, the operator will be
required to select either 208 or 240 after pressing
the on/off key to turn on the oven. The correct
voltage will be enlarged on the screen, identifying
which option to select (see below).
ventilation
The TurboChef Encore oven has been approved
by underwriter’s Laboratory for ventless operation
(uL KNLZ listing) for all food items except for
foods classified as “fatty raw proteins.” Such foods
include bone-in, skin-on chicken, raw hamburger
meat, raw bacon, raw sausage, steaks, etc. If
cooking these types of foods, consult local HVAC
codes and authorities to ensure compliance with
ventilation requirements.
To ensure continued compliance with all health,
building, and fire codes, you are required to
maintain clean and sanitary conditions around your
oven at all times.
NoTE: In no event shall the manufacturer assume
any liability for damages or injuries resulting from
installations which are not in compliance with the
instructions and codes previously listed. Failure to
comply with these instructions could result in the
issuance of a temporary cease and desist order from
the local health department until the environment
concerns are addressed.
208 VAC
SELECT VOLTAGE:
240 VAC
Part Number: CoN-7006
ChefComm Pro® lets you easily create menu
settings on a computer and upload them to
an oven via smart card or uSb. For more
information, call TurboChef Customer Support
at 800.90Turbo or +1 214.379.6000.