Vaddio Drop Down Series Mounts User Manual

Page 4

Advertising
background image

©2009 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 1-800-572-2011,
Main: 763-917-4400, FAX: 763-971-4464, www.vaddio.com Document Number 341-676 Rev. D

Drop Down Series

Small Platform 24” Pipe

Camera Mount

(535-2000-291)

Drop Down Series

Large Platform – 24” Pipe

Camera Mount
(535-2000-293)

Off-Set Drop Down Series

HD-18, HD-19 & HD-20

26” Pipe

Camera Mount
(535-2000-296)















Includes:

 One (1) Drop Down Small

Platform Ceiling Mount with
24” Pipe (fits Sony EVI-
D70, EVI-D100, Canon VC-
C50i, Polycom PowerCam
and LifeSize cameras)

 One (1) 1/4”-20 screw for

mounting the PTZ cameras
described above

 One (1) Ceiling Tile

Support Brace

 Install

Guide

(Camera not included)

Includes:

 One (1) Drop Down Small

Platform Ceiling Mount with
12” Pipe (fits Sony EVI-HD1,
Polycom EagleEye and
TANDBERG Precision HD
cameras)

 Four (4) – 3mm black

screws for mounting the
EagleEye camera

 One (1) – 1/4”-20 screw for

mounting Precision HD or
EVI-HD1 PTZ Camera

 One (1) Ceiling Tile Support

Brace

 Install

Guide

(Camera not included)

Includes:

 One (1) Drop Down Platform

Ceiling Mount with 26” Pipe
– approximate length (fits
Vaddio ClearVIEW HD-18,
HD-19 & HD-20 cameras)

Two (2) - 1/4”-20 x 5/8”
screw for mounting HD-18
and HD-19.

 Two ¼”-20 x 3/8” screws for

mounting the HD-20

USE ONLY 3/8” Long 1/4”-20
SCREWS FOR HD-20

 One (1) Ceiling Tile Support

Brace

 Install

Guide

(Camera not included)




INSTALLING THE MOUNT AND CAMERA:

The Drop Down Series of camera mounts can be mounted to either 2 foot square or 2’ by 4’ ceiling tiles, or a drywall ceiling. Note: When
locating the camera, consider viewing angles, lighting conditions, line of site obstructions and check for vibration where the camera is to be
mounted. Pick a location to optimize the performance of the camera. The integrator is responsible for following building codes, determining
the suitability of the suspended or drywall ceiling to carry the load of the camera and mount, as well as to make sure that the camera is
secured to the camera platform.

INTENDED USE:

These products were designed, built and tested for use indoors and to support the weight, size and shape of the prescribed products only.
Using these mounts for any other devices could damage that device and/or create potentially unsafe operating conditions.

HARDWARE WARRANTY:

Please see the Vaddio website at

http://www.vaddio.com

for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of

Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material
Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement
supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the
Vaddio website or through e-mail support at

[email protected]

.

Advertising