Vaddio EasyUSB PRO MIC I/O - Manual (Page 5)

PRO MIC I/O
Vaddio PRO MIC I/O - Document Number 342-0569 Rev A Page 5 of 16
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio factory technician must examine the product before operating. To reduce the risk of electric
shock, do not immerse in water or other liquids and avoid extremely humid conditions. Do not connect Ethernet
or Power over Ethernet (PoE) cables directly to the RJ-45 ports on the device as damage may result.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
PRO MIC I/O
999-8520-000: PRO MIC I/O (Worldwide)
Pack-out includes:
 One (1) PRO MIC I/O
 Documentation
.
PRO MIC I/O Duo
999-8522-000: PRO MIC I/O Duo (Worldwide)
Pack-out includes:
 Two (2) PRO MIC I/O
 Rack Kit (preconfigured 2-PRO MIC I/Os side by side with rack kit)
 Documentation
The PRO MIC I/O is intended to be used in conjunction with the EasyUSB Mixer/Amp only. There is no power
supply included with the PRO MIC I/O as it’s powered from the EasyMic Ports on the EasyUSB Mixer/Amp.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work
well for professional installations and can be the cause of intermittent connections which can result in
the RS-232 control line failing and locking up. For best results please use standard RJ-45 connectors
and test all cables for proper pin-outs prior to use.