Exposure, 16 basic functions – Vaddio Sony EVI-HD1 PTZ Camera User Manual
Page 16
16
Basic Functions
Exposure
Mode
Power Off
Power Off
1)
IFC
2)
Initializing
3)
Exposure mode
During displaying
Memory Recall
Command
Full Auto
Bright
Shutter Pri
Iris Pri
SPOT Light
Manual
the menu
CAM_AE
Full Auto/Manual/Shutter Pri/
×××
aa
4)
aaaa
Ч
5)
Ч
Iris Pri/Bright/Spot Light
CAM_AE Bright
×××
aa
a
ЧЧЧ
Ч
5)
Ч
CAM_Slow Shutter Limit ON/OFF
×××
a
aaaaa
Ч
5)
Ч
CAM_Shutter Reset/Up/Down/Direct
6)
ЧЧЧЧЧ
a
××
a
Ч
5)
Ч
CAM_Iris Reset/Up/Down/Direct
ЧЧЧЧЧЧ
a
×
a
Ч
5)
Ч
CAM_Gain Reset/Up/Down/Direct
ЧЧЧЧЧЧ
ЧЧ
a
Ч
5)
Ч
CAM_Bright Reset/Up/Down/Direct
ЧЧЧЧ
a
Ч
ЧЧЧ
Ч
5)
Ч
CAM_ExComp On/Off
×××
a
aaaaa
Ч
5)
Ч
CAM_ExComp Reset/Up/Down/Direct
7)
×××
a
aaaaa
Ч
5)
Ч
CAM_Backlight On/Off
×××
a
ЧЧ
Ч
a
ЧЧ
5)
Ч
1)
DC power is being supplied, but the camera has been turned off by a VISCA command.
2)
The period from the time IF Clear is sent, until the Reply Packet is returned.
3)
The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently fi
nishes the pan/tilt reset operation and stops at the Home position, until the
video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.
4)
a
: Only when the camera changes to BRIGHT mode from Full Auto or SHUTTER Pri mode.
5)
The camera is not limited in operation due to the menus. But the camera follows the operational restrictions of the current m
ode during IFC executing/initializing/exposure mode operation.
6)
You are not allowed to adjust the slow shutter setting while using Digital Effect.
7)
×:
This is not allowed when EX-COMP is set to OFF.