Vaddio Sony RMBR-300 Tech - Manual (Page 9)

Co
nn
ec
ti
o
ns a
nd Op
er
a
tio
ns
Connections
9 GB
Connections and Operations
Connections
This section focuses on the connection examples for the
BRC-300/300P camera. For connections with other
cameras, refer to the Operating Instructions supplied
with the camera you will connect.
Connecting a Camera Equipped
with a VISCA RS-232C Connector
1
Connect this unit to the camera using the RS-232C
connecting cable supplied with this unit.
2
Connect this unit to an AC outlet using the supplied
AC power adaptor and AC power cord.
Note
When using the VISCA RS-232C connectors, check that
the DIP switch on the bottom of this unit (page 8) is set
to RS-232C.
Connecting cables
Use the following connecting cable to connect devices
in this system.
RS-232C cable
EXT SYNC IN
IR SELECT 75
1 2 3
OFF ON
IN VISCA RS-232C OUT
! VISCA RS-422
1 2 3 4 5 6 7 8 9
DC IN 12V
R
VIDEO S VIDEO
RS-232C cable (supplied)
(SONY: 1-590-879-3X)
VISCA RS-232C IN
to AC outlet
VISCA RS-232C
DC IN 12V
AC power cord
(supplied)
to AC outlet
AC power adaptor
MPA-AC1 (supplied)
Camera BRC-300/300P
Cable Part No. Number
RS-232C cable
(3m (10feet)) 1-590-879-3X 1