Vaddio TRIO Solutions - Manual (Page 11)

TRIO I/O and TRIO Mic Solutions
Vaddio TRIO MIC Solutions - Document Number 342-0568 Rev A Page 11 of 16
S TEP - BY -S TEP I NSTALLATION I NSTRUCTIONS
TRIO Mic I/O Installation:
Locate the TRIO Mic I/O a centralized location near the room’s audio mixer. Follow steps below to install devices:
Diagram: Basic System Connections
STEP 1:
Connect the provided 18 VDC Power Supply to the TRIO Mic I/O.
STEP 2:
Connect the Cat-5 cable between the TRIO MIC I/O and the TRIO Ceiling or Table Mic Array
STEP 3:
Connect the balanced line level outputs from the TRIO Mic I/O to the room’s audio mixer.
STEP 4:
Connect the line level output from the room’s audio mixer to the AEC Reference input on the TRIO Mic I/O.
Optional Accessories - The TRIO Mic I/O has an optional accessory kit:
 Rack Mounting Kit: The rack kit provides a method for the TRIO Mic I/O to be installed in a 1RU space
within a rack. The Rack Kit includes two rack ears (one long and one short). The rack ears are mounted on
the sides of the TRIO Mic I/O using the existing screws included on the device.
TRIO MIC I/O - Rear
Power
Supply
Echo
Canceled
Line Audio
to Mixer
AEC Reference
From Mixer
Mic 1 Mic 2
➌
➍
➊
➋