General specifications – Vaddio ClearVIEW HD-20 User Manual

Page 10

Advertising
background image

ClearVIEW HD-20

ClearVIEW HD-20 Manual 342-0169 Rev. B

Page 10 of 16

General Specifications:

ClearVIEW HD-20 HD PTZ Camera

Part Numbers

ClearVIEW HD-20 999-6950-000 (North America)
ClearVIEW HD-20 999-6950-001 (International)

Image Device

6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor

Picture Elements

3.27M pixels

HD Resolutions

1080i/59.94/60, 1080/50i, 720p/59.94/60, 720/50p, 1080/30p and 1080/25p (SD Resolutions not Supported)

Lens

20x Optical Zoom Lens with HiLD™ (High Index Low Dispersion) Glass, F1.6 Wide to F3.5 Tele, 11-
Elements in 9-Groups

Focal Length

F=4.7mm wide to 94mm tele

Horizontal Viewing Angle

2.9

° to 55.2° - 16:9 Format

Video S/N Ratio

>50 dB

Invertible

Yes - With No Frame Delay

Minimum Illumination

1.6 LUX (F1.6, 50IRE)

Serial Control Protocol

RS-232 (Modified VISCA)

Pan/Tilt Range

Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees

Min. Object Distance

Wide End: .01m wide end, Tele end: 1.0m

Preset Positions

16 (internal), 6 recalled via IR Remote

Image Control

Red & Blue Gain, Detail, Chroma, Gamma, Pedestal, Iris, and Gain (available through RS-232 control)

Tally Light

Available through RS-232 Control

Connectors

12 VDC Power Input: EIAJ-04 Coaxial Power Connector

HD Video Outputs: YPbPr on DE-15 (D-Sub 15-pin HD), HDMI

RS-232/IR Out: RJ-45 Jack (RS-232 Communication and IR Out (with Quick-Connect -SR Interfaces)

EZ Power HD Video: RJ-45 Jack, for use with Quick-Connect - SR Interface or Quick-Connect
DVI/HDMI - SR Interface. Supplies power to the camera and returns HD video from the camera to the
Quick-Connect - SR Systems.

HD Video Select

16-Position Rotary Switch: Used to set HD Video Resolution Output

Camera Settings

10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished Functions

Accessory Slot Cards

EZIM HD-SDI Slot Card PN# 998-6900-007
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect CCU Only

General Information

Operating Temperature

32° to 104° F (0° to 40° C)

Power Consumption

Maximum 25 watts (without accessory card)

Dimensions

(H x W x D)

7.81” (198.37mm) x 6.67” (169.42mm) x 7.057” (179.25. mm)

Weight

5.6 lbs. (2.63083592 kg.)

Appendix 1:

YPbPr Video Pin-Out for the HD-20 Camera















Pin

YPbPr

1 Pr
2 Y
3 Pb
4 -
5 -
6 Pr

GND

7 Y

GND

8 Pb

GND

9 -

10 -
11 -
12 -
13 -
14 -
15 -

Advertising