Vaddio ClearVIEW HD-20 - Manual (Page 5)

ClearVIEW HD-20
ClearVIEW HD-20 Manual 342-0169 Rev. B Page 5 of 16
ClearVIEW HD-20 PTZ Camera, Rear View with Feature Call-outs:
5) RS-232 IN & IR Out:
The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by
the IR receivers, which can be transmitted to third party devices.
6) Dip Switch Settings:
Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See
page 5 for additional information on switch settings.
7) HD Video Select:
A rotary switch allows the user to choose the component HD output video resolution and format. See page 5 for
additional information on switch settings.
8) 12 VDC Input:
Power input for the standard, ClearVIEW HD-20 camera power supply.
9) HDMI Output:
The HDMI output feeds out HD digital video only (no copy protect or device communication is included). SD is not
supported
10) YPbPr Output:
Component HD video is fed through the DB-15 connector. YPbPr and HDMI signals are simultaneous. SD is not
supported
11) EZ Power/Video Port:
This RJ-45 connector is only used with the Quick-Connect SR Interface and the Quick- Connect DVI-D/HDMI SR
Interface to supply power and return HSDS video from the camera.
12) Slot for Optional Cards:
Optional slot cards can be plugged into the ClearVIEW HD-20 camera (the HD-SDI and the EZIM CCU Slot Cards
are available).
⑥
⑤
⑧
⑦
⑩
⑨
⑫
⑪